Please provide your VIN for proper part fitment
Rover
10-12 Land Rover Range Rover HSE 5.0L Engine w/o Supercharged VIN D 7th dgt 179K
Please provide your VIN for proper part fitment
Couldn't load pickup availability
10-12 Land Rover Range Rover HSE 5.0L Engine w/o Supercharged VIN D 7th dgt 179K
***Warranty covers the Long Block (Engine Block, Cylinder Heads, Head Gasket(s), Crankshaft, Pistons, Rods, Bearings, Oil Pump, Camshaft(s), Valves & Lifters)
There is NO core charge for this engine. To aid in installation, you get to keep your current engine and all attached accessories.***
***What is NOT Covered or Guaranteed to be included:
The engine you receive may or may NOT include some additional accessories and extra parts.
If included these parts are sold AS-IS with NO WARRANTY and were included to help protect the engine during storage and shipping.
Examples of these non-warranty parts include switches, sensors, cables, coils, wires, injectors, electronics, belts (including timing belt/chain), hoses, water pumps, brackets, intake/exhaust manifolds, oil pans and turbos/superchargers (if equipped).
To aid in installation, you get to keep your current engine and all attached accessories.
Warranty does NOT cover labor, diagnostic, towing or rental car costs.***
Installation Check List:
(Failure to complete the following will void Warranty)
- Determine why the original engine failure occurred and make appropriate repairs.
- Insure this engine is the same application as the one being replaced.
- Clear all computer diagnostic codes from the vehicle prior to installing.
- Exchange the oil pan and pick up tube.
- Inspect and replace gaskets & seals (front seal, rear main seal, valve cover gaskets, oil pan gaskets).
- On crankshaft bolts that are drilled through sealant must be applied to avoid leaks.
- Install new thermostat & gasket (warranty will be void if engine heat tab is melted or removed)
- Replace the timing belt.
- Remove all cap-plugs orifice covers.
- Replace water pump.
- Install replacement sparkplugs & wires.
- Exchange the flywheel and bolts.
- Exchange attached accessory items to insure proper fit (mounts, intake manifold, exhaust manifold, distributor, sensors).
- Disable fuel/ignition before attempting to start engine. This will allow the oil to prime as indicated by the manufacturer.
- Replace engine oil, oil filter, air filter, fuel filters, coolant-antifreeze.
- Drain excess oil and coolant from exhaust system.
- If equipped with an engine oil cooler the radiator or external cooler must be replaced.
- Insure the cooling system is flushed and functioning properly.
***Warranty does NOT cover labor, diagnostics, towing, rental car, or any other expense related to an item being defective/damaged***
Donor vehicle 2010 Land Rover Range Rover HSE Black
VIN# SALME1D43AA320701
Miles 179287
Manufactured England
Body Type: Sport Utility Vehicle
Drive Type:4x4
Style:4WD 4dr HSE
Engine: STDEN 5.0L V8 Engine
Transmission: STDTN 6-Speed Automatic Transmission with CommandShift
Axle Ratio: STDAX 3.54 Axle Ratio
Exterior Color: Santorini Black (820)
Interior Color: Sand/Jet (Sand Car) (034DC)
Option Codes: STDEN, STDTN, STDAX, STDGV, STDTR, STDWL, STDST, STDTM, STDRD,SIRSAT
OEM LR079066, LR011201, LR016968, LR026163, 8W93-6P052-AE, 8W93-9424-AF
Used
Normal use wear
Actual pictures
Share

