2013-2019 Nissan Sentra SL 1.8L CVT Engine Motor MRA8DE VIN A 4th digit 74K

***Warranty covers the Long Block (Engine Block, Cylinder Heads, Head Gasket(s), Crankshaft, Pistons, Rods, Bearings, Oil Pump, Camshaft(s), Valves & Lifters)
There is NO core charge for this engine. To aid in installation, you get to keep your current engine and all attached accessories.***

***What is NOT Covered or Guaranteed to be included:
The engine you receive may or may NOT include some additional accessories and extra parts.
If included these parts are sold AS-IS with NO WARRANTY and were included to help protect the engine during storage and shipping.
Examples of these non-warranty parts include switches, sensors, cables, coils, wires, injectors, electronics, belts (including timing belt/chain), hoses, water pumps, brackets, intake/exhaust manifolds, oil pans and turbos/superchargers (if equipped).
To aid in installation, you get to keep your current engine and all attached accessories.
Warranty does NOT cover labor, diagnostic, towing or rental car costs.***

Installation Check List:
(Failure to complete the following will void Warranty)

- Determine why the original engine failure occurred and make appropriate repairs.
- Insure this engine is the same application as the one being replaced.
- Clear all computer diagnostic codes from the vehicle prior to installing.
- Exchange the oil pan and pick up tube.
- Inspect and replace gaskets & seals (front seal, rear main seal, valve cover gaskets, oil pan gaskets).
- On crankshaft bolts that are drilled through sealant must be applied to avoid leaks.
- Install new thermostat & gasket (warranty will be void if engine heat tab is melted or removed)
- Replace the timing belt.
- Remove all cap-plugs orifice covers.
- Replace water pump.
- Install replacement sparkplugs & wires.
- Exchange the flywheel and bolts.
- Exchange attached accessory items to insure proper fit (mounts, intake manifold, exhaust manifold, distributor, sensors).
- Disable fuel/ignition before attempting to start engine. This will allow the oil to prime as indicated by the manufacturer.
- Replace engine oil, oil filter, air filter, fuel filters, coolant-antifreeze.
- Drain excess oil and coolant from exhaust system.
- If equipped with an engine oil cooler the radiator or external cooler must be replaced.
- Insure the cooling system is flushed and functioning properly.

***Warranty does NOT cover labor, diagnostics, towing, rental car, or any other expense related to an item being defective/damaged***

Donor vehicle 2018 Nissan Sentra SL Black
VIN# 3N1AB7AP3JY257022
Miles 74531
Body Type:Sedan
Drive Type:FWD
Style:SL CVT
Engine: 1.8L I-4 DOHC, variable valve control, regular unleaded, engine with 124HP
Transmission: Xtronic CVT
Axle Ratio: 3.517
Exterior Color: KH3 - Super Black
Interior Color: G - Charcoal

Option Codes: 50S, FLO, H11, NET, SGD, U35, Z66, L92, C03, M92, B92

OEM 10102-3RC2C, 10102-3RC0C, 101023RC2C, 101023RC0C
Used
Normal use wear
Actual pictures