Please provide your VIN for proper part fitment
Volkswagen
2015-2017 Volkswagen Passat SE 1.8L FWD Engine Motor ID CPRA VIN T 5th digit 99K
Please provide your VIN for proper part fitment
Couldn't load pickup availability
2015-2017 Volkswagen Passat SE 1.8L FWD Engine Motor ID CPRA VIN T 5th digit 99K
***Warranty covers the Long Block (Engine Block, Cylinder Heads, Head Gasket(s), Crankshaft, Pistons, Rods, Bearings, Oil Pump, Camshaft(s), Valves & Lifters)
There is NO core charge for this engine. To aid in installation, you get to keep your current engine and all attached accessories.***
***What is NOT Covered or Guaranteed to be included:
The engine you receive may or may NOT include some additional accessories and extra parts.
If included these parts are sold AS-IS with NO WARRANTY and were included to help protect the engine during storage and shipping.
Examples of these non-warranty parts include switches, sensors, cables, coils, wires, injectors, electronics, belts (including timing belt/chain), hoses, water pumps, brackets, intake/exhaust manifolds, oil pans and turbos/superchargers (if equipped).
To aid in installation, you get to keep your current engine and all attached accessories.
Warranty does NOT cover labor, diagnostic, towing or rental car costs.***
Installation Check List:
(Failure to complete the following will void Warranty)
- Determine why the original engine failure occurred and make appropriate repairs.
- Insure this engine is the same application as the one being replaced.
- Clear all computer diagnostic codes from the vehicle prior to installing.
- Exchange the oil pan and pick up tube.
- Inspect and replace gaskets & seals (front seal, rear main seal, valve cover gaskets, oil pan gaskets).
- On crankshaft bolts that are drilled through sealant must be applied to avoid leaks.
- Install new thermostat & gasket (warranty will be void if engine heat tab is melted or removed)
- Replace the timing belt.
- Remove all cap-plugs orifice covers.
- Replace water pump.
- Install replacement sparkplugs & wires.
- Exchange the flywheel and bolts.
- Exchange attached accessory items to insure proper fit (mounts, intake manifold, exhaust manifold, distributor, sensors).
- Disable fuel/ignition before attempting to start engine. This will allow the oil to prime as indicated by the manufacturer.
- Replace engine oil, oil filter, air filter, fuel filters, coolant-antifreeze.
- Drain excess oil and coolant from exhaust system.
- If equipped with an engine oil cooler the radiator or external cooler must be replaced.
- Insure the cooling system is flushed and functioning properly.
***Warranty does NOT cover labor, diagnostics, towing, rental car, or any other expense related to an item being defective/damaged***
Donor vehicle 2016 Volkswagen Passat SE Black
VIN# 1VWBT7A35GC032529
Miles 99824
Body Type:Sedan
Drive Type:FWD
Style:4dr Sdn 1.8T Auto SE PZEV
Engine: 1.8L I-4 gasoline direct injection, DOHC, variable valve control, intercooled turbo, regular unleaded, engine with 170HP
Engine Code CPRA (R4 1.8 TFSI EA888 gen 3)
Transmission: 6-Speed Automatic Transmission with Tiptronic
Transmission Code NTJ (09G AQ250-6F)
Axle Ratio: 3.87
Exterior Color: A1A1 - Black Uni
Interior Color: BP - Cornsilk Beige w/Brown Piping
Option Codes: BAA, BKM, BRK, BSG, STDEN, STDRD, STDST, STDTM, STDTN, STDTR, STDWL
OEM 06K-100-034-S, 06K-100-032-C, 06K-100-032-M, 06K-100-033-M, 06K-109-210-AJ, 06K-903-143, 06K-133-062-E, 06K-103-023-N,
Used
Normal use wear
Actual pictures
JETTA 15-17 1.8L, VIN 1 (5th digit, gasoline), (engine ID CPRA)
JETTA 18 1.8L (VIN 1, 5th digit, engine ID CPRA)
PASSAT 15 1.8L, VIN T (5th digit, gasoline), (engine ID CPRA)
PASSAT 16-17 1.8L, VIN T (5th digit), (engine ID CPRA)
Share

