2016-2020 Nissan Maxima 3.5L AT CVT Engine Motor VIN A 4th digit VQ35DE 40K 10102-4RMAX OEM

2016-2020 3.5L AT CVT Engine Motor VIN A 4th digit VQ35DE 40K 10102-4RMAX OEM Donor vehicle 2020 Nissan Maxima S XTRONIC CVT Red VIN# 1N4AA6BV2LC381825 Miles 40518 ***Warranty covers the Long Block (Engine Block, Cylinder Heads, Head Gasket(s), Crankshaft, Pistons, Rods, Bearings, Oil Pump, Camshaft(s), Valves & Lifters). There is NO core charge for this engine. To aid in installation, you get to keep your current engine and all attached accessories.*** ***What is NOT Covered or Guaranteed to be included: The engine you receive may or may NOT include some additional accessories and extra parts. If included these parts are sold AS-IS with NO WARRANTY and were included to help protect the engine during storage and shipping. Examples of these non-warranty parts include switches, sensors, cables, coils, wires, injectors, electronics, belts (including timing belt/chain), hoses, water pumps, brackets, intake/exhaust manifolds, oil pans and turbos/superchargers (if equipped). To aid in installation, you get to keep your current engine and all attached accessories. Warranty does NOT cover labor, diagnostic, towing or rental car costs.*** Installation Check List: (Failure to complete the following will void Warranty) - Determine why the original engine failure occurred and make appropriate repairs. - Insure this engine is the same application as the one being replaced. - Clear all computer diagnostic codes from the vehicle prior to installing. - Exchange the oil pan and pick up tube. - Inspect and replace gaskets & seals (front seal, rear main seal, valve cover gaskets, oil pan gaskets). - On crankshaft bolts that are drilled through sealant must be applied to avoid leaks. - Install new thermostat & gasket (warranty will be void if engine heat tab is melted or removed) - Replace the timing belt. - Remove all cap-plugs orifice covers. - Replace water pump. - Install replacement sparkplugs & wires. - Exchange the flywheel and bolts. - Exchange attached accessory items to insure proper fit (mounts, intake manifold, exhaust manifold, distributor, sensors). - Disable fuel/ignition before attempting to start engine. This will allow the oil to prime as indicated by the manufacturer. - Replace engine oil, oil filter, air filter, fuel filters, coolant-antifreeze. - Drain excess oil and coolant from exhaust system. - If equipped with an engine oil cooler the radiator or external cooler must be replaced. - Insure the cooling system is flushed and functioning properly. ***Warranty does NOT cover labor, diagnostics, towing, rental car, or any other expense related to an item being defective/damaged*** Body Type:Sedan Drive Type:FWD Front-wheel drive Style:S 3.5L Xtronic CVT Engine:VQ 3.5L V-6 gasoline direct injection, DOHC, CVTCS variable valve control, premium unleaded, engine with 300HP Transmission:CVT Axle Ratio: 5.25 Exterior Color: NBM - Carnelian Red Tintcoat E10 Premium Paint - Carnelian Red Interior Color: G - Charcoal Option Codes: 50S, E10, FL2, SGD, B10, L92, C03 OEM 10102-4RMAX Used Normal use wear Actual pictures