Please provide your VIN for proper part fitment
Ford
2018-2021 Ford Expedition Max XLT 3.5L turbo Engine Motor VIN T 8th digit 152K
Please provide your VIN for proper part fitment
Couldn't load pickup availability
2018-2021 Ford Expedition Max XLT 3.5L turbo Engine Motor VIN T 8th digit 152K
***Warranty covers the Long Block (Engine Block, Cylinder Heads, Head Gasket(s), Crankshaft, Pistons, Rods, Bearings, Oil Pump, Camshaft(s), Valves & Lifters)
There is NO core charge for this engine. To aid in installation, you get to keep your current engine and all attached accessories.***
***What is NOT Covered or Guaranteed to be included:
The engine you receive may or may NOT include some additional accessories and extra parts.
If included these parts are sold AS-IS with NO WARRANTY and were included to help protect the engine during storage and shipping.
Examples of these non-warranty parts include switches, sensors, cables, coils, wires, injectors, electronics, belts (including timing belt/chain), hoses, water pumps, brackets, intake/exhaust manifolds, oil pans and turbos/superchargers (if equipped).
To aid in installation, you get to keep your current engine and all attached accessories.
Warranty does NOT cover labor, diagnostic, towing or rental car costs.***
Installation Check List:
(Failure to complete the following will void Warranty)
- Determine why the original engine failure occurred and make appropriate repairs.
- Insure this engine is the same application as the one being replaced.
- Clear all computer diagnostic codes from the vehicle prior to installing.
- Exchange the oil pan and pick up tube.
- Inspect and replace gaskets & seals (front seal, rear main seal, valve cover gaskets, oil pan gaskets).
- On crankshaft bolts that are drilled through sealant must be applied to avoid leaks.
- Install new thermostat & gasket (warranty will be void if engine heat tab is melted or removed)
- Replace the timing belt.
- Remove all cap-plugs orifice covers.
- Replace water pump.
- Install replacement sparkplugs & wires.
- Exchange the flywheel and bolts.
- Exchange attached accessory items to insure proper fit (mounts, intake manifold, exhaust manifold, distributor, sensors).
- Disable fuel/ignition before attempting to start engine. This will allow the oil to prime as indicated by the manufacturer.
- Replace engine oil, oil filter, air filter, fuel filters, coolant-antifreeze.
- Drain excess oil and coolant from exhaust system.
- If equipped with an engine oil cooler the radiator or external cooler must be replaced.
- Insure the cooling system is flushed and functioning properly.
***Warranty does NOT cover labor, diagnostics, towing, rental car, or any other expense related to an item being defective/damaged***
Donor vehicle 2020 Ford Expedition Max XLT Black
VIN# 1FMJK1JT0LEA63275
Miles 152583
Manufactured United State
Body Type: Sport Utility Vehicle
Drive Type: 4x4
Style: XLT 4x4
Engine: 99T .3.5L ECOBOOST V6 ENGINE
Transmission: 44U .10SPD AUTO TRANS W/SLCTSHFT
Axle Ratio: X15 3.31 Axle Ratio
Exterior Color: UM - Agate Black
Interior Color: VH - Ebony
Option Codes: VH 99T 44U K1J TDV 21F 43V UM 59N 202A 649
OEM LL3E-6007-MA, LL3Z-6007-A, JL3E-6C879-BF, JL34-9B325-AC, JL3E-6K682-BF, KL34-9J279-AA
Used
Normal use wear
Actual pictures
EXPEDITION 19-21 (3.5L, VIN T, 8th digit, turbo)
FORD F150 PICKUP 18 3.5L (VIN G, 8th digit, turbo), from 02/26/18
FORD F150 PICKUP 19-20 3.5L (turbo), VIN 4 (8th digit)
Share

