2019 Ram 1500 Laramie 5.7L V8 FI DOHC 16V NF2 Engine 68209607AB OEM *ReaD*
Regular price
$3,724.00 USD
Regular price
Sale price
$3,724.00 USD
Unit price
/
per
2019 Ram 1500 Laramie 5.7L V8 FI DOHC 16V NF2 Engine 68209607AB OEM *ReaD*
2019 Ram 1500 Laramie 5.7L V8 FI DOHC 16V NF2 Engine 68209607AB OEM *ReaD* *Dent, scuff and rust see pic 10-11* Donor vehicle 2019 Ram 1500 Laramie VIN# 1C6SRFJT6KN773983 Mileage 54796 ***Warranty covers the Long Block (Engine Block, Cylinder Heads, Head Gasket(s), Crankshaft, Pistons, Rods, Bearings, Oil Pump, Camshaft(s), Valves & Lifters). There is NO core charge for this engine. To aid in installation, you get to keep your current engine and all attached accessories.*** ***What is NOT Covered or Guaranteed to be included: The engine you receive may or may NOT include some additional accessories and extra parts. If included these parts are sold AS-IS with NO WARRANTY and were included to help protect the engine during storage and shipping. Examples of these non-warranty parts include switches, sensors, cables, coils, wires, injectors, electronics, belts (including timing belt/chain), hoses, water pumps, brackets, intake/exhaust manifolds, oil pans and turbos/superchargers (if equipped). To aid in installation, you get to keep your current engine and all attached accessories. Warranty does NOT cover labor, diagnostic, towing or rental car costs.*** Installation Check List: (Failure to complete the following will void Warranty) - Determine why the original engine failure occurred and make appropriate repairs. - Insure this engine is the same application as the one being replaced. - Clear all computer diagnostic codes from the vehicle prior to installing. - Exchange the oil pan and pick up tube. - Inspect and replace gaskets & seals (front seal, rear main seal, valve cover gaskets, oil pan gaskets). - On crankshaft bolts that are drilled through sealant must be applied to avoid leaks. - Install new thermostat & gasket (warranty will be void if engine heat tab is melted or removed) - Replace the timing belt. - Remove all cap-plugs orifice covers. - Replace water pump. - Install replacement sparkplugs & wires. - Exchange the flywheel and bolts. - Exchange attached accessory items to insure proper fit (mounts, intake manifold, exhaust manifold, distributor, sensors). - Disable fuel/ignition before attempting to start engine. This will allow the oil to prime as indicated by the manufacturer. - Replace engine oil, oil filter, air filter, fuel filters, coolant-antifreeze. - Drain excess oil and coolant from exhaust system. - If equipped with an engine oil cooler the radiator or external cooler must be replaced. - Insure the cooling system is flushed and functioning properly. ***Warranty does NOT cover labor, diagnostics, towing, rental car, or any other expense related to an item being defective/damaged*** Ratio 3.21 Cab Crew Cab Bed Short 5.7 ENGINE: 5.7L V8 HEMI MDS VVT TRANSMISSION 8-Speed A/T OEM 68209607AB Stock# HY-15 Ro B06005 Pre-owned Normal use wear Actual pictures
Donor Vehicle
Model :
RAM15NEW
Year :
2019
Mileage :
54000 (0 = not available or unknown)
Stock Number :
0B0010
Notes :
HY-15 Ro B06005 *Dent, scuff and rust see pic 10-11*
This Part Will Fit These Makes And Models With These Options
DODGE 1500 PICKUP 16-18 5.7L (VIN T, 8th digit)
DODGE 1500 PICKUP 19-20 classic style (5 lug wheel), 5.7L (VIN T, 8th digit)
DODGE 1500 PICKUP 19-20 new style (6 lug wheel), 5.7L (VIN T, 8th digit), 12 volt system (non-eTorque)
DODGE 1500 PICKUP 19-20 classic style (5 lug wheel), 5.7L (VIN T, 8th digit)
DODGE 1500 PICKUP 19-20 new style (6 lug wheel), 5.7L (VIN T, 8th digit), 12 volt system (non-eTorque)