Skip to product information
1 of 12

Jeep

2014-2017 Jeep Wrangler AT ERB 3.6L V6 24V VVT Engine Motor 90K 68082776AE OEM

Regular price $3,442.19 USD
Regular price Sale price $3,442.19 USD
Sale Sold out
Shipping Free Shipping.

2014-2017 Jeep Wrangler AT ERB 3.6L V6 24V VVT Engine Motor 90K 68082776AE OEM

2014-2017 Jeep Wrangler AT ERB 3.6L V6 24V VVT Engine Motor 90K 68082776AE OEM Donor vehicle 2017 JEEP WRANGLER Silver VIN# 1C4BJWDG4HL531275 Miles 90476 ***Warranty covers the Long Block (Engine Block, Cylinder Heads, Head Gasket(s), Crankshaft, Pistons, Rods, Bearings, Oil Pump, Camshaft(s), Valves & Lifters). There is NO core charge for this engine. To aid in installation, you get to keep your current engine and all attached accessories.*** ***What is NOT Covered or Guaranteed to be included: The engine you receive may or may NOT include some additional accessories and extra parts. If included these parts are sold AS-IS with NO WARRANTY and were included to help protect the engine during storage and shipping. Examples of these non-warranty parts include switches, sensors, cables, coils, wires, injectors, electronics, belts (including timing belt/chain), hoses, water pumps, brackets, intake/exhaust manifolds, oil pans and turbos/superchargers (if equipped). To aid in installation, you get to keep your current engine and all attached accessories. Warranty does NOT cover labor, diagnostic, towing or rental car costs.*** Installation Check List: (Failure to complete the following will void Warranty) - Determine why the original engine failure occurred and make appropriate repairs. - Insure this engine is the same application as the one being replaced. - Clear all computer diagnostic codes from the vehicle prior to installing. - Exchange the oil pan and pick up tube. - Inspect and replace gaskets & seals (front seal, rear main seal, valve cover gaskets, oil pan gaskets). - On crankshaft bolts that are drilled through sealant must be applied to avoid leaks. - Install new thermostat & gasket (warranty will be void if engine heat tab is melted or removed) - Replace the timing belt. - Remove all cap-plugs orifice covers. - Replace water pump. - Install replacement sparkplugs & wires. - Exchange the flywheel and bolts. - Exchange attached accessory items to insure proper fit (mounts, intake manifold, exhaust manifold, distributor, sensors). - Disable fuel/ignition before attempting to start engine. This will allow the oil to prime as indicated by the manufacturer. - Replace engine oil, oil filter, air filter, fuel filters, coolant-antifreeze. - Drain excess oil and coolant from exhaust system. - If equipped with an engine oil cooler the radiator or external cooler must be replaced. - Insure the cooling system is flushed and functioning properly. ***Warranty does NOT cover labor, diagnostics, towing, rental car, or any other expense related to an item being defective/damaged*** Body Type:Sport Utility Drive Type:4x4 Style:Willys Wheeler 4x4 Engine: Pentastar 3.6L V-6 DOHC, variable valve control, regular unleaded, engine with 285HP ERB 3.6L V6 24V VVT Engine Transmission:5-speed automatic DGJ 5-Speed Automatic Transmission 5-SPEED AUTO W5A580 TRANSMISSION Axle Ratio: 3.73 DME 3.73 Rear Axle Ratio OEM 68082776AE, 04593923AB Used Normal use wear Actual pictures

Donor Vehicle
Model :
WRANGLER
Year :
2017
Mileage :
90000 (0 = not available or unknown)
Stock Number :
0C0015
Notes : 2014 2015 2016 2017 Jeep Wrangler